liquid pool meaning in Chinese
液池
Examples
- So the manufacturing of liquid pool by lasers is studied in this work
针对这一难题,本文采用激光加工技术对芯片储液池的加工制备进行研究。 - Being a critical technology , the domestic manufacturing of the liquid pool still depends on traditional machining
但是,我国目前却仍停留在传统的机械台钻加工工艺上。 - The paper introduces a measurement method of two - phase flow parameters based on digital image processing techniques through processing image of an experiment study of the transient drag property on the high - temperature particles falling into the cold liquid pool
文章以处理高温颗粒沉降冷池实验图像为例，介绍基于数字图像识别技术的气液两相流参数检测方法。 - The number of the channels was chosen , both the relationship between the channel wide and the minimum screen area covered by the pool and the relationship between the location of the pool and the covered screen area were presented by analyzing the screen area covered by the liquid pool under the worst operating condition
对通道式表面张力贮箱提出了系统的设计方法，包括筛网面积分析，得出不同加速度水平下的设计方案；通过通道压力网络计算，得出最差工况下，各管道流量、压降、筛网压降，提出了以最小剩余质量为目标的优化设计方法。 - Aiming at reducing the roughness of the sidewalls in the manufacturing of the pmma liquid pool by co _ 2 lasers , in the hypothesis that the intensity of the laser has a guassian distribution , the temperature distribution in slab material with limited thickness is studied according to traditional thermal conductive formulas , and the condensing progress of the melted surface of sidewalls is researched . it is concluded from the discussion of temperature distribution that the air bulbs is the major reason for the roughness of the sidewalls
为降低co _ 2激光加工pmma材料储液池侧壁粗糙度,本文根据传统的热传导方程,假定激光强度为高斯分布,对有限厚板状材料的温度场进行分析;并考察侧壁表面熔化层凝固过程的特征;结果表明,侧壁粗糙度形成的主要原因在于侧壁表面熔化层凝固前气泡未及时析出。